We rent two different transmitters with our Silent Disco Sets. Namely the:
- TX-50RF
- TX-60RF
Below we explain the differences with an instruction manual. Don't know what to choose? No problem! We make sure to always include adapter cables so you can connect anything.
TX-50RF
Features:
- Ideal for DJ equipment
- Needs power
- Long range (up to 500m)
- RCA audio input
- Transition cables included
TX-60RF
Features:
- Bluetooth connection possible, so ideal for mobile
- Has a battery and can be powered
- Easily portable
- Range up to 200m
- Transition cables included
- Jack microphone input
EXPANDED EXPLANATION SENDERS
Operating instructions TX-50RF transmitter
The TX-50RF transmitter is basically the transmitter for one of the music channels on your headphones.
Included with the transmitter is an adapter for connecting the transmitter to the steam mains and an RCA jack cord to connect the transmitter to a device.
This instruction manual briefly explains the operation of this transmitter.
An instruction manual is also included with the transmitters.
- Power input
- Power supply indicator light
- Audio input interface
- ON / OFF switch (with High and Low option)
- Channel Display LED
- Channel change button
- Transferring music: Connect the transmitter to the audio source at 3, slide the ON / OFF switch (4) to display the channel at 5. Make sure the transmitter matches the channel of the headset, then the headset can receive music (signal) from the transmitter.
- High/Low switch: Select on the ON / OFF switch (button 4) for LOW for a transmission distance of up to 200 meters (and better audio quality) and HIGH for a transmission distance of up to 500 meters. When set to HIGH, make sure the headphones are not too close to the transmitter(s).
- Channel switch: press button 6 to change channels, 5 indicates the change of settings of button 6.
The TX-60RF transmitter is a transmitter with convenient features when there is no power available at the location. For example, the transmitter is equipped with a battery and a bluetooth connection making it portable.
With the transmitter you will find an adapter to charge the built-in battery, a jack-jack cable to connect the transmitter to a device and an instruction manual on how the transmitter works.
This instruction manual briefly explains the operation of the transmitter.
- Bluetooth ON / OFF button
- Bluetooth indicator light
- Channel change button
- Channel Display LED
- Microphone indicator light
- Microphone switch button
- Microphone volume control
- Microphone input interface
- Audio input interface
- Charge status indicator
- ON / OFF switch
- Power input
- Battery Cover
- Portable buckle
- Transferring music: Connect the transmitter to the audio source at 9, slide the ON / OFF switch (11) to display the channel at 4. Make sure the transmitter matches the channel of the headset, then the headset can receive music (signal) from the transmitter. Or choose Bluetooth connection (see below)
- Channel switch: press button 3 to change channels, 4 indicates the change of settings of button 3.
- Charging: Turn off transmitter and connect to power at 12, charging indicator (10) lights up. Red indicates charging status, green indicates fully charged.
- Charging when the transmitter is working: You can also charge the transmitter while it is working. Turn on the transmitter and connect it to the power supply at 12, charging indicator (10) lights up. This means the transmitter is charging and working at the same time.
- Microphone: Connect the external microphone to 8, press the button 6, the indicator light 5 lights up, the transmitter starts the microphone audio signal.
Press the 6 again, the indicator light 5 is off, the transmitter switches to the initial state. - Bluetooth: With your cell phone, for example, you can make a bluetooth connection to the transmitter. When connecting, the transmitter is called TX-60RF. Enabling the bluetooth works as follows:
Activate bluetooth: press and hold button 1 for about 3 seconds, indicator 2 lights up. Bluetooth opens.
Bluetooth pairing: When the transmitter is on, press and hold button 1 for about 5 seconds. Indicator 2 alternately lights red and blue, this is pairing mode. Indicator 2 is constant blue when the transmitter is connected to your device. Now the audio signal from the paired device is sent from the transmitter to the headphones.
Turn off Bluetooth: Press and hold button 1 for about 3 seconds, indicator 2 turns red and turns off, then Bluetooth is turned off.
